Abstract
Frio and Vicksburg sandstones in the McAllen Ranch and Hinde fields in south Texas show two depth-related zones of secondary porosity. Anomalously high porosity in the upper zone, from 4,000 to 6,500 ft (1,220 to 1,980 m), is related to the dissolution of analcime cement by acidic pore fluids released from adjacent shales. Much of this acid may be produced by the reduction of octahedral iron in smectite clay. Sodium released by analcime dissolution may be responsible for abnormally high salinities calculated for pore fluids in these sandstones. Calcite cementation below the upper zone may be related to fluids rich in calcium carbonate that have migrated up fault zones from great depth. The lower zone of secondary porosity extends from 8,400 to 10,000 ft (2,560 to 3,050 m) at Hinde and from 8,400 to 14,000 ft (2,560 to 4,270 m) at McAllen Ranch. The top of this zone also corresponds to the clay dehydration depth and the top of the abnormally pressured zone. At this depth and temperature, randomly interstratified illite and/or smectite clay becomes ordered and a large amount of water is expelled from the clay structure by potassium fixation. Smectite illitization produces minor amounts of kaolinite and chloritemore » and, more importantly, releases silica and acidic pore water. The acidic pore water migrates into adjacent sandstones and enhances the dissolution of feldspar grains and calcite, creating secondary porosity. The shales at McAllen Ranch have undergone more extensive illitization than those at Hinde, and more secondary porosity is observed in the McAllen Ranch sandstones. Data from detailed chemical and mineralogical analyses were used in mass-balance calculations to confirm that the amounts of acid produced by these reactions can account for the observed secondary porosity in these sandstones.« less
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.