Abstract
/cm2 dose of As ions followed by both isochronal and isothermal annealing. The elementary defects generated first during solid-phase epitaxial recovery of implantation-induced amorphous layers at temperatures of 550 °C and/or 600 °C are {311} defects 2–3 nm long. They are considered to be transformed into {111} and {100} defects after annealing at temperatures higher than 750 °C. These secondary defects show the opposite annealing behavior to the dissolution and growth by the difference of their depth positions at 800 °C. This phenomenon is explained by the diffusion of self-interstitials contained in defects. With regard to the formation and dissolution of defects, there is no significant difference between the effects of rapid thermal annealing (950 °C for 10 s) and furnace annealing (800 °C for 10 min).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Applied Physics A: Materials Science & Processing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
