Abstract
Laser beam welding of metals has progressed dramatically over the last years mainly arising from joining applications in the field of electromobility. Allowing the flexible, automated manufacturing of mechanically, electrically, and thermally stressed components, the process is more frequently applied for joining highly reflective materials, for example for battery tab and busbar connections. The local, non-contact energy input favors this welding technology; however, joining of copper and aluminum sheets still poses a challenge due to the physical properties of the joining partners and intermetallic phases from dissimilar metal interaction, which reduce seam performance. The use of green laser radiation compared to infrared laser radiation offers the advantage of a significantly increased absorptivity for copper materials. A changed incoupling behavior is observed, and a lower deep penetration threshold has been already proven for 515 nm wavelength. When copper and aluminum are welded with the former as top sheet, this welding mode is essential to overcome limited aspect ratios from heat conduction welding. However, the opportunities of applying these beam sources in combination with spatial power modulation to influence the interconnection area of copper-aluminum joints have not yet been studied. The aim of this work is therefore to investigate the seam properties and process stability of different overlap welding strategies using green laser radiation for dissimilar metal welding. A microstructural analysis of the different fusion zones and mechanical strength of the joints are presented. In addition, the experimental parameter sets were analyzed regarding their application in battery module busbars by examining the electrical resistance and temperature distribution after welding. A parameter window was identified for all investigated welding strategies, with the stitched seam achieving the most stable results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
