Abstract
Silicon rubber gaskets are commonly used in many industries for low pressure sealing conditions only. The research studies about the sealing performance improvement of a novel composite gasket made of the silicone rubber filled with ramie natural fibers in a bolted joint connection. In this research the sample of gasket consists of 4 different types of gasket i.e. a pure silicone rubber gasket and the silicone rubber composite gasket with 1, 2 and 3 layers of ramie fiber woven. The gaskets are tested using a water pressure testing equipment with a variation of internal fluid pressure and difference torques at 8 N.m, 12 N.m, 16 N.m and 20 N.m. The sealing performance is measured based on the maximum fluid pressure that can be hold by the gaskets before the fluid leaking occurred. The results show that the silicone rubber composite gaskets have better sealing performance comparing with the pure silicone rubber gaskets where the silicon rubber gaskets capable to hold the internal fluid pressure until around 5 times rather than pure silicon rubber gaskets (0.17 MPa comparing with 0.90 MPa). On the other hand the sealing performance of the composite gasket with 3 layers is almost 2 times better than the composite gasket with 1 layer and around 1.5 times better than the composite gasket with 2 layer of fiber woven.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
