Sea trials of Sigma wave energy converter – slacking and snapping of TLP mooring lines

Abstract

Sigma Energy has performed its foremost prototype tests of scaled wave energy converter in a real sea environment. The prototype was a point absorber with a cylindrical buoy, a mechanical power take-off system with a counterweight, moored to the seabed as a tension leg platform (TLP) with three equal tendons. In these extensive experiments, numerous device characteristics were measured and analysed. The present paper focuses on the dynamic forces in the mooring lines, and some unexpected and rare data obtained. It is well known that TLP tendons are prone to a brief loss of tension (the slacking) and that, after such events, high snapping forces of short duration can arise. Partly by intention, and partly due to underestimation of the dynamical forces, several such slacking-snapping incidents were recorded during the experiments. In some severe storms, the snapping forces were up to six times higher than the tendon pretension. The paper presents several recordings of dynamic forces and platform motion during these critical events. It analysis them, and gives a typical scenario under which they occur. It gives also some theoretical explanations, and numerical predictions of dynamical tendon forces, with their comparison to the experimental results.