Abstract
AbstractElectrochemical polarization provides a practical means to enhance the typically sluggish electrochemical kinetics of screen‐printed electrodes. This study introduces an electrochemically deposited poly(amino acid) modification on screen‐printed carbon electrodes (SPCE) for the concurrent detection of Vitamin C (VC) and Paracetamol (PA). The poly(amino acid)‐modified sensor not only addresses the issue of peak potential overlap between VC and PA but also enhances the electrochemical responses for both analytes. For example, Poly(L–Cysteine)‐modified SPCE exhibited a linear concentration range of 1.00 to 107.14 μM for VC, with a detection limit of 0.37 μM, and a linear concentration range of 0.10 to 10.71 μM for PA, with a detection limit of 0.033 μM. In practical applications, this device successfully detected VC and PA simultaneously in VC Yinqiao tablets, a Chinese‐Western pharmaceutical formulation. The experimental results were satisfactory, with recovery values ranging from 95.13 % to 106.58 % for VC and 95.56 % to 104.12 % for PA, achieved through the standard addition technique applied to the pharmaceutical formulation. The poly(amino acid)‐modified SPCE demonstrates heightened sensitivity, lower detection limits, exceptional anti‐interference properties, and high reproducibility. These qualities hold significant promise for future advancements in drug detection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.