Abstract
Knowing the value of the key mass-transfer model parameters is a critical requirement for evaluating volatile organic compound (VOC) emissions from indoor materials. The key parameters are diffusion coefficient (D), partition coefficient (K), and initial material-phase emittable concentration (C0). Although these parameters can be individually measured in the laboratory, the required time and expense are substantial. A simple method of determining D and C0 using data from ventilated chamber tests and dimensionless analysis is proposed and then validated using VOC emission data from the material emissions database developed by National Research Council Canada (NRC). The primary application of this method is to provide a rapid screening-level estimate of inhalation exposure to VOCs in building materials. Two standard scenarios using the NRC database are employed to demonstrate the value of the approach to indoor air quality assessment. The method could be a useful screening tool for assessing material emissions or environmental exposures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.