Abstract
Commercial purity aluminum sheets were anodized at 10–30V in 10% oxalic acid solution at room temperature. The anodized specimens were tested for its resistance against scratch damage using a microscratch adhesion tester operated in the progressive mode. The specimens were studied also for crystal structure, chemical composition, surface morphology, surface topography, microhardness and electrical resistivity by X-ray diffractometry, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy, stylus based surface profilometer, Vickers microhardness tester and four point probe method, respectively. Microscratch test results showed improved adhesion of the anodic aluminum oxide coating with the untransformed bulk, as the anodizing potential decreased. During scratch test, the specimens showed formation of cohesive cracks at a load of 1N. Energy dispersive X-ray analysis showed that the concentration of oxygen increased marginally on increasing the anodizing potential. Field emission scanning electron microscopy showed comparatively less porous microstructure of the anodized specimens for anodizing conducted at potential 20V or lower. The results of profilometry showed formation of smooth coating surface at potentials lower than 25V. Microhardness test showed increased hardness of the anodized aluminum with increasing anodizing potential. The electrical resistivity of anodized aluminum was in the range of 106–109Ω·cm. X-ray diffraction measurements indicated amorphous structure of the so obtained aluminum oxide coating.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
