Abstract
Evaluation test of high-pressure hydrogen gas should be carried out more simplified. As an alternative approach in high-pressure hydrogen gas test, to simulate the hydrogen gas environment SSRT was performed with cathodically charged. Specimen was used a low-alloy steel, SCM435 with the tensile strength of 1000 MPa. The tensile properties was evaluated with cathodic charging with 3%NaCl solution and the current density of 50～600A/m2 . Values of RRA obtained by the tests at cathode current density of 400A/m2 are equivalent to those in the 35MPa hydrogen gas. In addition, an amount of diffusible hydrogen equivalent to that in high-pressure hydrogen gas was obtained by increasing the current density. Therefore, this approach is able to simulate the SSRT conducted in high-pressure hydrogen gas environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Proceedings of Mechanical Engineering Congress, Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
