Abstract
Flue Dusts Containing Heavy Metal Ions and Chloride.I. Phase Analysis, Model Experiments for Recycling Four flue dusts from a cement factory, an electric-furnace steelmaking plant and a municipal waste plant were analyzed by powder diffraction methods. Chloride combines above all with alkali ions or heavy metal ions, especially yielding PbCl2 and KPb2Cl5. The controlled sublimation of these chloride compounds in open crucibles was developed and optimized in our laboratory. Between 850°C and 1150°C and at reaction times from 30 min up to 12 h, the chloride content decreases to below 0.1 wt-%. The sublimed phase mainly consists of alkali and lead chloride. Zinc is found in the flue dust as oxide and is enriched during this process. Recent investigations with a small waelz kiln give analogous results. With our procedure, the manufacturer by himself is able to exploit flue dusts containing a large amount of heavy metal elements and chloride which cannot be deposited. The remaining product contains mainly zinc oxide which can be recycled in the zinc industry or returned to the production process. The sublimed chloride compounds may be recycled in the potash industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.