Abstract
ABSTRACTSilicide/SiGe Schottky barriers are of importance for applications in infrared detectors and SiGe contacts, as well as for fundamental studies of metal-semiconductor interfaces. We have fabricated silicide/SiGe Schottky diodes by the reaction of evaporated Pt and Ir films on p-SiGe alloys with a thin Si capping layer. The onset of metal-SiGe reactions was controlled by the deposited metal thickness. The Schottky barrier heights were determined from internal photoemission. Pt-SiGe and Ir-SiGe reacted diodes have barrier heights that are higher than the corresponding silicide/p-Si diodes. PtSi/Si/SiGe diodes, on the other hand, have lower “barrier heights” that decrease with increasing Ge concentration. The smaller barrier heights in such silicide/Si/SiGe diodes are due to tunneling through the unconsumed Si layer. Equations are derived accounting for this tunneling contribution, and lead to an extracted “barrier height” that is the Si barrier height reduced by the Si/SiGe band offset. Highly bias-tunable barrier heights are obtained (e.g. 0.30 eV to 0.12 eV) by allowing the SiGe/Si band offset to extend higher in energy than the Schottky barrier, leading to a cut-off-wavelength-tunable silicide/SiGe/Si Schottky diode infrared detector.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
