Abstract

We report on the fabrication and characterization of vertical geometry transparent Schottky barrier ultraviolet detectors based on n−/n+-GaN structures grown over sapphire substrates. Spectral responsivity measurements were made using illumination through the UV transparent Schottky barrier metal. A responsitivity as high as 0.18 A/W was measured for wavelengths shorter than the absorption edge of GaN. The detector speed was RC limited and the fall time was 118 ns. The 1/f noise is identified to be the main noise contribution. At 300 Hz, we measure the noise equivalent power at less than 4×10−9 W.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.