Scaling and profiles of heat flux during partial detachment in DIII-D

Abstract

The authors examine the scaling of the peak divertor heat flux and total divertor plate power in partially detached divertor (PDD) discharges in DIII-D, as a function of input power and radiated power. The peak divertor heat flux in the attached plasma increases linearly with input power, but saturates in the detached cases. The total divertor plate power remains linear with input power in both the attached and detached plasmas. This is consistent with the fact that the heat flux peak is reduced from the attached case but other areas receive increased radiant heating from the detached plasma. The divertor plate radiant heating is linear with input power because the total radiated power from the entire plasma is a linear function of input power in both attached and detached plasma. In the private flux region, radiated heat flux absorbed on the target plate calculated from bolometer data is enough to account for the measured plate heating. Approximately half of the overall plate heating power in detached plasma is due to absorbed radiation. By mapping the divertor heat flux before and during the PDD to flux coordinates, and comparing with a flux mapping of inserted bolometer and tangential TV data, they have verified that the radiated power is emitted from the same flux surfaces on which heat flux is reduced.