Abstract
The capacity of MFCs (microbial fuel cells) to produce electricity from various substrates and wastes has drawn the attention of the scientific community in the last decades. Thus, this technology has become the focus of many research studies trying to improve its performance by investigating alternative materials and determining optimal operating conditions. In this work, a new single-chamber air-cathode microbial fuel cell configuration has been developed to operate in continuous mode with vertical up-flow. This design incorporates a novel embedded ionic liquid-based membrane-cathode assembly working as separator. The ionic liquids selected for the present work are triisobutyl(methyl)phosphoniumtosylate, [PI4,I4,I4,1+][TOS−], and methyltrioctylammonium chloride, [MTOA+][Cl−]. MFC performance is investigated in terms of electricity production and wastewater treatment for various feed flow rates. The results show that [PI4,I4,I4,1+][TOS−] outperforms [MTOA+][Cl−] when used as part of the separator due the conductivity of its anion and cation. For a feed flow rate of 0.25 mL min−1, [PI4,I4,I4,1+][TOS−] offers a maximum power density of 12.3 W m−3anode versus 6.8 W m−3anode achieved by the [MTOA+][Cl−]-based MFC, and also provided the highest percentage of chemical oxygen demand removal (60%). For the same ionic liquid, MFC power output increases as feed flow decreases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
