Abstract
The singular stress field at the interface-corner of a bi-material scarf joint is analysed for a strip of finite width, w, under remote tension and bending. The two substrates are taken as linear elastic and isotopic. The intensity of the singular stress field is calculated using a domain integral method, and is plotted as a function of joint geometry and material mismatch parameters. It is envisaged that the intensity of singularity can serve as a valid fracture criterion provided the zone of nonlinearity is fully embedded within the singular elastic field. It is assumed that fracture initiates when the magnitude of the corner singularity attains a critical value; consequently, the fracture strength of the joint depends upon the size of the structure. In addition, the interfacial stress intensity factor and the associated T-stress are determined for an edge interfacial crack. When the crack is short with respect to the width of the strip, the stress intensity factor is dominated by the presence of the corner singularity; a boundary layer formulation is used to determine the coupling between the crack tip field and the interface-corner field. The solution suggests that an interfacial crack grows unstably with a rapidly increasing energy release rate, but with only a small change in mode mix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.