Scale effects in rockfill behaviour

Abstract

The particle sizes in large rockfill structures such as dams prevent laboratory testing. The prediction of field behaviour requires the development of models that integrate size effects. A distinct element method model was developed in which grains are characterised by aggregations of a maximum of 14 elementary spherical particles (the resulting particle shape approaches real geometries and allows a reasonable breakage evolution) and the particle breakage criterion involves the subcritical propagation of fissures in the grain. Time effects are included through the velocity of crack propagation, a function of stress state and defect size, which is introduced as a random set of varying lengths. The model was used to simulate the stress–strain response, the evolution of grain size distribution and creep behaviour under oedometric conditions. The model has been used to simulate size effects in the range 0·28–56·0 cm of initial particle size (uniform distributions were tested). Compressibility and creep were partially validated by comparing calculations with test results covering a reduced range of particles. The paper presents the evolution of short-term compressibility and creep indices in terms of particle size. The model is a useful and novel tool with which to extrapolate laboratory results from scaled grain size distributions to prototype dimensions.