Abstract
UV photo-preactivation/thermally-induced grafting was employed for grafting 4-vinylpyridine (4-VP) on polyvinylidene fluoride (PVDF), and graphene oxide (GO) was modified with 4'-carboxy-2,2':6',2"-terpyridine (CTPy). Then sandwich PVDF-g-4VP/GO-CTPy/polytetrafluoroethylene (PTFE) membrane was fabricated for adsorption of Cu (II) as a model. The membrane formation, static adsorption thermodynamics, kinetics and dynamic adsorption/desorption were studied. The results showed that, the addition of polyethylene glycol (PEG 4000) as porogen can significantly increase the porosity and adsorption capacity of the membranes. The adsorption could be well described by the Langmuir model and pseudo-second-order kinetic model. The breakthrough volume and saturated volume increased with rising GO-CTPy contents. The adsorption capacity of sandwich membranes was much higher than that of mixed matrix membranes. The sandwich membrane also exhibited excellent reusability in dynamic adsorption/desorption cycles, demonstrating great potential in adsorption of trace Cu (II).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.