Sand Control Screen Erosion: Prediction and Avoidance

Abstract

AbstractErosion of sand control screens in oil and gas wells can lead to catastrophic completion failures, substantial production losses and damage to downstream facilities. Screen erosion can be caused by a number of completion design and environmental factors. However, the dominant failure mechanism is production of small solids through the screen openings, leading to development of localized high-velocity hot spots in the screen filter media and subsequent failure of the media.The current work discusses a detailed screen erosion study conducted to evaluate screen flow parameters leading to erosion and to provide safe operating guidelines for wells completed using cased hole perforated frac-pack (CHFP) and cased hole perforated gravel-packed (CHGP) completions with premium wire-mesh sand control screens.The erosion study consisted of both experimental work to determine erosion damage in screen samples and computational fluid dynamic (CFD) simulations to help visualize particle flow paths through the metal-mesh sand control media and determine local flow velocities and erosion-induced wear patterns.The experimental erosion tests and CFD modeling were performed on a specific screen configuration used in a number of subsea gas wells subject to high velocity flow conditions and associated high screen erosion potential. An empirical erosion model was then developed to translate short-term, high-velocity laboratory test results into field erosion predictions and well flow guidelines to minimize erosion potential.This paper presents results of the experimental work and associated CFD modeling as well as completion flow guidelines developed for field operation of subsea gas wells.