Sand Cap Placement and Cap Thickness Monitoring: A Case Study at a Confined Disposal Facility

Abstract

Thin sediment capping is a commonly used technique to prevent mobilization of contaminants from sediments into the environment. A 70‐m‐deep subaqueous confined disposal facility (CDF, 350,000 m2) at Malmøykalven, Oslofjord, which received dredged contaminated sediments from Oslo Harbor, was capped with 148,900 m3 of sand in 2009. This research serves as a case study regarding some of the key considerations involved with the cap placement and monitoring of the cap layer. Uncertainty is included in all the cap thickness monitoring methods and a combined use of them provided a better understanding of the cap coverage and structure at the site. An open water disposal model (STFATE) was used to simulate the behavior of the barge‐released cap material. The modeling results were consistent with field observations regarding the material spread, and the results provided insight into the relatively high material losses calculated. Better knowledge obtained of material settling resulted in cap properties and cap monitoring methods that are useful when planning similar operations. ©2015 Wiley Periodicals, Inc.