Salt Bridges Contained in Nanoporous Glasses or Polymers: Improved Alternatives to Vycor

Abstract

Nanoporous glass plugs are widely used to contain the electrolyte solution that forms a salt bridge between the sample and the reference electrode. Even though reference electrodes with plugs made of nanoporous glass (such as Vycor or CoralPor glass) are commercially available and are frequently used, the limits of their use were not explored until very recently [1]. It will be shown in this presentation that at ionic strengths lower than 100 mM, the half-cell potentials of reference electrodes with nanoporous glass plugs are not sample independent, as it would be desirable, but they depend on the ionic sample composition. Sample dependent shifts of more than 50 mV in the half cell potential were encountered. Reference potentials were found to be affected in aqueous solutions by HCl, NaCl, KCl, and CaCl2, and in acetonitrile by trifluoroacetic acid and the supporting electrolyte tetrabutylammonium perchlorate. These observations cannot be explained by the liquid junction potential between two mutually miscible electrolyte solutions, as commonly described with the Henderson equation. Instead, they result from the surface charge density on the glass surface and the resulting electrostatic screening of ion transfer into the glass pores when the latter have dimensions comparable to or smaller than the Debye length. Users of reference electrodes with nanoporous plugs at the junction to the sample need to be aware of these limitations to avoid substantial measurement errors.This presentation will also address how problems at the junction to nanoporous plugs can be avoided using novel plug materials and selecting electrolyte conditions judiciously.