Abstract
The L-H transition power threshold (PLH) is found to have a significant dependence on q95, at ne ∼ 3.2 × 1019 m−3 on DIII-D. Comprehensive 2D turbulence and flow measurements in the plasma edge reveal the co-existence of two frequency bands of broadband modes across the L-H transition with higher flow shear at higher q95, which can help explain the linear decrease in PLH as q95 is increased from 3.5 to 4.9. Density fluctuation measurements by beam emission spectroscopy at higher q95 show that the lower frequency band (<20 kHz) of the broadband modes propagates in the ion diamagnetic direction in the lab frame (identified as an ion mode), whereas the higher frequency band (>20 kHz) propagates in the electron diamagnetic direction (identified as an electron mode). The turbulence amplitude at the plasma edge is higher at higher q95, implying a higher drive for a Reynolds stress driven zonal flow. At lower density, ne ∼ 1.5 × 1019 m−3, there is little dependence of PLH on q95. Linear CGYRO kinetic simulation has shown a switch from one mode to two modes at higher q95 at ne ∼ 3.2 × 1019 m−3 compared to lower q95. The ion temperature profile has been shown to strongly impact the dual mode characteristics with the increasing growth rate of the ion mode at a higher edge Ti gradient. The observations suggest that it may be possible to reduce the required input power to trigger the L-H transition for ITER if both the ion and electron modes are similarly driven in the plasma edge.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.