Abstract
Ultra-compact phase shifters are presented. The proposed phase-shifting circuits utilize the lumped element all-pass networks. The transition frequency of the all-pass network, which determines the size of the circuit, is set to be much higher than the operating frequency. This results in a significantly small chip size of the phase shifter. To verify this methodology, 5-bit phase shifters have been fabricated in the S - and C -band. The S -band phase shifter, with a chip size of 1.87 mm × 0.87 mm (1.63 mm2),has achieved an insertion loss of 6.1 dB ±0.6 dB and rms phase-shift error of less than 2.8° in 10% bandwidth. The C -band phase shifter, with a chip size of 1.72 mm × 0.81 mm (1.37 mm 2), has demonstrated an insertion loss of 5.7 dB ± 0.8 dB and rms phase-shift error of less than 2.3° in 10% bandwidth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.