Abstract

The optical fiber pre-warning system (OFPS) has been gradually considered as one of the important means for pipeline safety monitoring. Intrusion signal types are correctly identified which could reduce the cost of troubleshooting and maintenance of the pipeline. Most of the previous feature extraction methods in OFPS are usually quested from the view of time domain. However, in some cases, there is no distinguishing feature in the time domain. In the paper, firstly, the intrusion signal features of the running, digging, and pick mattock are extracted in the frequency domain by multi-level wavelet decomposition, that is, the intrusion signals are decomposed into five bands. Secondly, the average energy ratio of different frequency bands is obtained, which is considered as the feature of each intrusion type. Finally, the feature samples are sent into the random vector functional-link (RVFL) network for training to complete the classification and identification of the signals. Experimental results show that the algorithm can correctly distinguish the different intrusion signals and achieve higher recognition rate.

Highlights

  • At present, the pipeline transportation is one of the main modes of transportation for oil and natural gas

  • Oil or natural gas leakage caused by pipeline damage can lead to serious environmental pollution and economic loss [1,2,3]

  • The optical fiber pre-warning system (OFPS) is often used for disasters occurrence monitoring such as oil and gas pipeline leakage, and it is mainly used for detection and recognition of intrusion source

Read more

Summary

Introduction

The pipeline transportation is one of the main modes of transportation for oil and natural gas. The optical fiber pre-warning system (OFPS) is often used for disasters occurrence monitoring such as oil and gas pipeline leakage, and it is mainly used for detection and recognition of intrusion source [5, 6]. Some documents proposed they found an effective way to set the soft or hard thresholds for every point along the fiber adaptively to improve the signal-to-noise ratio (SNR) [7, 8]. The experimental results show that this algorithm can effectively recognize the running, digging, and pick mattock signals

Algorithm flowchart of feature extraction and classification
Feature extraction from multi-level wavelet decomposition
RVFL NN classification
Collection of measured data
Feature extraction of intrusion signal
Identification of intrusion signal by RVFL NN
Results
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call