Abstract
Two full-depth gravel asphalt concrete (AC) pavements of 0.15- and 0.08-m thickness on a sand subgrade were loaded with 4 million and 0.65 million repetitions of a 75-kN super-single wheel load using the linear tracking device (LINTRACK), a heavy-traffic simulator. Frequent measurements of asphalt strains, temperatures, rutting, cracking, and falling weight deflectometer (FWD) were made. The data analysis of the rutting measurements indicates that all rutting could be ascribed to subgrade deformation (secondary rutting). No evidence was found of shear deformation within the asphalt layer (primary rutting). The data analysis also indicates that the observed rutting performance of the LINTRACK test sections (to a maximum rut depth of 18 mm) coincides closely with the average criterion from the Shell Pavement Design Manual, which relates subgrade strain to allowable number of strain repetitions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
