Abstract
Polyethylenimine (PEI)-coated biomass-chitosan composite fiber (PBCF) was fabricated to recover Ru from acetic acid waste solution. The present work aimed to understand the effects of molecular weight of chitosan and drying method on stability and sorption performance of the PBCF. For this, the PBCF was prepared by extruding the mixed solutions of chitosan and Corynebacteriumglutamicum to form the composite fibers which were modified with ionic polymer, PEI. The degree of swelling of PBCFs prepared by hot-air, natural, and freeze drying methods were 1.25, 1.34, and 1.07 %, respectively, indicating that the freeze-drying method was the best. Batch biosorption studies showed that the maximum Ru uptake could be achieved with PBCF prepared with medium molecular weight chitosan, and could reach 34.1 mg/g, which was 7.9 times higher than that of the commercial ion exchange resin, LEWATIT® MonoPlus M 500 (4.3 mg/g). Therefore, PBCF can be considered as an alternative sorbent to synthetic resin for recovery of Ru form industrial acetic acid waste solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.