Running-specific prosthesis' performance characterization by dynamic finite element approach.

Abstract

Composite running-specific prostheses (RSP) are widely used by athletes with lower limb amputations to simulate the spring-like behavior of biological legs. However, the effect of these devices on the biomechanics of athletes with transtibial amputations remains uncertain. To address this issue, this study proposes a time-dependent finite element model that uses angles and dynamic loads during ground contact to evaluate RSP performance parameters such as stiffness and energy efficiency. The study also examines the impact of running speed and RSP geometry on performance. The in-silico characterization approach used in this study takes into account both the intrinsic characteristics of the RSP and the athlete's biomechanics to identify the influence of fundamental geometric variables of the RSP on performance. The model is verified by comparing its results with experimental data. The study found that as running speed increases, RSP stiffness, vertical ground reaction force (vGRF), and contact time decrease. The force-displacement profiles of RSP are nonlinear, but a linear function can be used to accurately represent their behavior at high sprinting speeds. Using higher RSP reduces energy efficiency and vGRF due to their lower stiffness. J-curve RSP result in higher stiffness, vGRF, and strain energy, while C-curve RSP are associated with longer contact times and higher energy efficiency.