RPAS performance model for fast-time simulation research on integration in non-segregated airspace

Abstract

PurposeThe purpose of this paper was to elaborate the performance model of the remotely piloted aircraft systems (RPAS) which was destined for simulations of the construction characteristics, airspeeds and trajectory of flight in the controlled, non-segregated airspace according to the standard instrument departure and arrival procedures (SIDs and STARs).Design/methodology/approachThis study used systems engineering approach: decomposition of RPAS performance model into components, relations and its connection with components of controlled the airspace system. Fast-time simulations (FTS) method, which included investigation of many scenarios of the system work, minimizing the number of input variables and low computing power demand, is also used.FindingsPerformance envelope of many fixed-wing RPAS was not published. The representative RPAS geometry configuration was feasible to implement. Power unit model and aerodynamic model needed to be accommodated to RPAS category. The range of aircraft minimum drag coefficient differed in the investigated range of take-off mass and wing loading.Research limitations/implicationsFixed-wing RPAS of small and medium categories cover take-off mass (25–450 kg), wing loading (40–900 N/m2) and power loading (8–40 W/N).Practical implicationsThis is a research on integration of the RPAS in the controlled, non-segregated airspace. The results of the work may be used in broadening the knowledge of the RPAS characteristics from the perspective of operators, designers and air traffic services.Originality/valueThe elaborated performance model of the RPAS used the minimum number of three input variables (take-off mass, wing loading and power loading) in identification of the complete RPAS characteristics, i.e. construction features (aerodynamic, propulsion and loads) and flight parameters (airspeeds and flight trajectory).