Abstract

A procedure to monitor citrus juice samples was established to quantitate vitamin C by capillary electrophoresis using a previously developed method. Dilution and filtration were the only preparation requirements and separation was achieved with an uncoated capillary using a 35mM sodium borate buffer (pH 9.3) containing 5% (v/v) acetonitrile at 21 kV and 23 degrees C. Detection was performed by high speed scanning between 200 and 360 nm. From the multiwave length scan, the electropherogram at 270 nm was extracted and used to quantitate ascorbic acid. The ascorbic acid concentration was calculated with an internal standard method, with ferulic acid as internal standard. The level of ascorbic acid during analysis was stabilized with ethylenediaminetetraacetic acid and dithiothreitol was used to reduce dehydroascorbic acid to ascorbic acid to estimate the total vitamin C level. Results were similar to those obtained by liquid chromatography and the method is now used to determine routinely the level of ascorbic acid in citrus juices.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.