Abstract
An experimental study was undertaken to investigate the effects of roughness on the structure of turbulent boundary layers in open channels. The study was carried out using a laser Doppler anemometer in shallow flows for three different types of rough surface, as well as a hydraulically smooth surface. The flow Reynolds number based on the boundary layer momentum thickness ranged from 1400 to 4000. The boundary layer thickness was comparable with the depth of flow and the turbulence intensity in the channel flow varied from 2 to 4 percent. The defect profile was correlated using an approach which allowed both the skin friction and wake strength to vary. The wake parameter was observed to vary significantly with the type of surface roughness in contradiction to the “wall similarity” hypothesis. Wall roughness also led to higher turbulence levels in the outer region of the boundary layer. The profound effect of surface roughness on the outer region as well as the effect of channel turbulence on the main flow indicates a strong interaction, which must be accounted for in turbulence models. [S0098-2202(00)00803-8]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
