Abstract
This article presents the predictions of the rotordynamic performance of oil-free turbochargers (TCs) for various lobed gas foil bearings (GFBs) with the first-generation bump-type configuration and compares these predictions to the measured test data reported earlier. The three-lobed GFBs used for the simulations have increased bearing clearances and mechanical preloads with a fixed minimum bearing clearance, thus yielding larger average bearing clearances and higher wedge effects at the same time. The engine-induced TC housing excitation is found to have no influence on the critical speeds and damping ratios of the rotor rigid modes. The synchronous and asynchronous GFB analyses imply decreases in destabilizing forces for the highly lobed GFBs. The predicted critical speed and damping ratio of the TC rotor supported on the lobed GFBs demonstrate increasing system natural frequency and enhanced rotordynamic stability with increasing mechanical preload. The rotordynamic and bearing analyses of the lobed GFBs validate the beneficial effects of the mechanical preload on the rotordynamic stability of GFBs even with an increased average bearing clearance, which leads to a decreased bearing friction torque as well.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.