Abstract

This study deals with the roles of a magnetic field and circular rotation of a circular cylinder on the dissemination of solid phase within a nanofluid-filled square cavity. Two wavy layers of the non-Darcy porous media are situated on the vertical sides of a cavity. An incompressible smoothed particle hydrodynamics (ISPH) method was endorsed to carry out the blending process concerning solid phase into nanofluid and porous media layers. Initially, the solid phase is stationed in a circular cylinder containing two open gates. Implications of a buoyancy ratio ( N = −2: 2), Hartmann number ( Ha = 0: 100), rotational frequency [Formula: see text], Darcy parameter [Formula: see text], Rayleigh number [Formula: see text], nanoparticles parameter [Formula: see text], and amplitude of wavy porous layers [Formula: see text] on the lineaments of heat/mass transport have been carried out. The results revealed that the diffusion of the solid phase is permanently moving toward upward except at opposing flow mode [Formula: see text] toward downward. The lower Rayleigh number reduces the solid-phase diffusions. A reduction in a Darcy parameter lessens the nanofluid speed and solid-phase diffusions in the porous layers. A reduction in [Formula: see text] from [Formula: see text] to [Formula: see text] diminishes the maximum of streamlines [Formula: see text] by 13.19% at [Formula: see text], by 46.75% at [Formula: see text], and by 74.75% at [Formula: see text].

Highlights

  • Convective flows through porous structures are received several research studies and the reason for their numerous industrial and technological purposes

  • The influences of a turning circular cylinder on blending solid and fluid phases within a cavity filled by porous media and nanofluid have been simulated by the incompressible smoothed particle hydrodynamics (ISPH) method

  • It is remarked that an increase in an angular frequency increases the rotational velocity of an open circular cylinder and it changes the blending of solid phase within nanofluid

Read more

Summary

Introduction

Convective flows through porous structures are received several research studies and the reason for their numerous industrial and technological purposes. The influences of a turning circular cylinder on blending solid and fluid phases within a cavity filled by porous media and nanofluid have been simulated by the ISPH method.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call