Abstract

The phenomenon of strong stabilization of concentrated aqueous dispersions (emulsions) of polymers by colloidal particles of organic nature (microparticles of synthetic latexes), not accompanied by a significant increase in effective viscosity, opened, firstly, the possibility of carrying out the processes of pigmenting them at low energy costs with a maximum yield (dynamic state, meets the conditions of intensification of heterogeneous chemical-technological processes) and, secondly, determined the directions of further research in this area. So, in contrast to the classical method of emulsion stabilization by mineral microparticles adsorbed directly on the surface of their droplets, microparticles of organic origin interact with them through an interlayer of the dispersion medium, localizing in the immediate vicinity of the dispersed phase and thus maintaining a high mobility of the interphase boundaries. In this regard, the proposed method for predicting the type of emulsions of polymers, taking into account the contact wetting angle and the wetting area of the surface of solid particles of a stabilizer with water and a polymer, requires further verification on various systems. The obtained data of fundamental importance also allowed us to propose new applications of stabilized concentrated artificial latexes for solving applied problems.

Highlights

  • The phenomenon of strong stabilization of concentrated aqueous dispersions of polymers by colloidal particles of organic nature, not accompanied by a significant increase in effective viscosity, opened, firstly, the possibility of carrying out the processes of pigmenting them at low energy costs with a maximum yield and, secondly, determined the directions of further research in this area

  • В последнее время повышенный интерес вызывают дисперсии с высоким содержанием полимерной дисперсной фазы (ДФ) не менее 60 мас.%

  • Стабилизация водной дисперсии эпоксидного олигомера микрочастицами различной химической природы и морфологии / Д

Read more

Summary

Номер образца

6 представлены результаты исследования устойчивости к набуханию (W, %) покрытий и свободных пленок, сформированных из составов No 1 и 2, в зависимости от продолжительности воздействия на них модельных солевых сред различной концентрации. В связи с этим нами была разработана технология нанесения специальных полос противоскольжения 9 видно, что течение лака, полученного первым способом, на всех этапах отверждения носит ньютоновский или близкий к нему характер, а вторым способом – квазипластичный. При применении 70%-ной водной дисперсии и отвердителя TELALIT-180 наблюдается несколько иная зависимость твердости покрытия от времени сшивки Получаемых с использованием 70%-ной водной дисперсии ЭД-22 и отвердителя TELALIT-180 в зависимости от времени при толщине покрытия 50 мкм: 1 – покрытие нанесено сразу введения отвердителя, 2 –. Ед.), то указанный состав лака рекомендован для финишного слоя комплексного декоративно-защит­ного покрытия грунт/лак металлопродукции от атмосферной и химической коррозии.

Внешний вид покрытия
Список использованных источников
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call