Rosen-type Pb(Mg1∕3Nb2∕3)O3–PbTiO3 single crystal piezoelectric transformer

Abstract

In this study, a Rosen-type Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3) single crystal piezoelectric transformer is presented. First, we simulate the operation of this transformer using the finite element method and ANSYS. By adjusting the dimensions of the piezoelectric transformer, a maximum voltage step-up ratio of 138 can be obtained at a frequency of 33.8 kHz when the output part is open. Second, we fabricate a transformer with the size of 20 mm length, 4 mm width, and 1 mm thickness to examine the simulation results. It is found that this transformer exhibits a maximum voltage step-up ratio of 134 at 37 kHz, with the efficiency over 95% when driving a liquid crystal display backlight, which shows good consistency with the numerical simulation results. Besides, we investigate the electrical properties under different frequencies and load resistances. When the input voltage increases, a maximum output power of 1 W is obtained with the temperature rise less than 10 degrees C.