Abstract
The interfaces are very important for kesterite‐structured solar cells. In this study, a facile room temperature chemical sulfurization process is developed to modify the surface of the CZTSe films, which can prevent the decomposition of kesterite film at high temperature during the traditional sulfurization process and thus introducing the deep defects in the absorber layer. It is found that the (NH4)2S vapor sulfurizes the surfaces of the CZTSe thin films previously etched by ammonia. Consequently, the surface defects are passivated by the incorporated sulfur, and the interfacial band alignment is improved at the junction. The open circuit voltage (VOC) of the solar cell device is improved from 364 mV to 406 mV, with the cell efficiency increased to 9.04% when the (NH4)2S vapor treatment time is optimized at 25 min. This study affords a new perspective for enhancing the performance of kesterite‐based thin film solar cells using a facile surface sulfurization approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.