Abstract

A longwave-infrared photodetector made of double layers of 100nm amorphous germanium (a-Ge) and 25nm amorphous silicon (a-Si) have been demonstrated. Under room temperature, the device shows the responsivity of 1.7 A/W, detectivity of 6×108 Jones, and noise equivalent power (NEP) of 5pW/√Hz under 5V bias and at 20kHz operation. Studies of frequency dependent characteristics and device modeling indicate that, above 100Hz or beyond the bandwidth of thermal response, the device operates as a quantum detector having the photoelectrons produced by optical excitation from the bandtail states to the mobile states of a-Ge. The superior device performance may be attributed to the combination of two amplification mechanisms: photoconductive gain in a-Ge and cycling excitation process (CEP) in a-Si, with the latter being the dominant factor. Besides its attractive performance, the device has a simple structure and is easy to fabricate at low cost, thus holding promise for night vision, sensing, autonomous driving, and many other applications.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.