Abstract
Grafted structures between SnO2 and ZnO nanowires were realized in a two-step process of growth. First, the rootstocks of SnO2 or ZnO nanowires were synthesized by thermal evaporation technique. Second, a thin Au layer was sputter deposited on the sample and synthesis of nanowire scions of ZnO or SnO2, respectively, on the rootstocks was realized by thermal evaporation technique again. In both growth steps, SnO2 powder or a mixture of ZnO and carbon powders was use as source materials for the synthesis. Different rootstock/scion combinations of SnO2/ZnO, ZnO/SnO2 nanowires (called heterostructures) and ZnO/ZnO, SnO2/SnO2 nanowires (called homostructures) were synthesised. The fabricated grafted nanowires were examined by field-emission scanning electron microscope and their compositions were analyzed by energy dispersive spectroscopy and X-ray diffraction analysis. The test results indicate that this type of nanostructure material is very promising for NO2 gas sensing at ppt level at room temperature. Among the fabricated structures the SnO2/ZnO nanowires showed the best sensing performance with the high sensitivity and fast response and recovery time. We also discussed the gas sensing mechanism of the fabricated sensors based on the band diagram.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.