Abstract

AbstractThe effect of humic acid (HA) concentration on membrane fouling and treatment efficiency was investigated in a hybrid process of tubular alumina ultrafiltration (UF) and TiO2 photocatalyst-coated polypropylene (PP) beads with air backflushing for advanced water treatment, and compared with the previous study with water backflushing. With increasing HA concentration in water, membrane fouling occurred severely on the surface and inside the ceramic membrane. The treatment efficiencies of turbidity and dissolved organic matters (DOM) were maximal as 99.3 and 89.9% at HA 8 mg/L, respectively. DOM could be treated effectively until higher HA concentration in the hybrid process with air backflushing than that with water backflushing. Treatment portions of UF, photocatalyst adsorption, and photo-oxidation were evaluated by comparing the treatment efficiencies of (UF), (UF + TiO2), and (UF + TiO2 + UV) processes. The membrane fouling resistance was minimal at (UF + TiO2 + UV) process. It proved that the p...

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call