Abstract
Green synthesis of mesoporous γ-AƖ2O3, a cutting-edge material for sustainable application in medicine, engineering, energy, and water treatment, is still challenging. Our study used a one-pot strategy for facile synthesis of γ-AƖ2O3 by sol-gel method using starch from cassava waste. AƖ(OH)3 were bound to the O-H groups of the starch molecule to form the AƖ(OH)3-starch complex in a nano-network confined in starch polymer cages. Its calcination at 500 ℃ produced a mesoporous, highly crystalline water stable γ-AƖ2O3 with a pore size of 2.07 nm and an extensive BET surface area (215 cm2/g). Using the response surface methodology (RSM), the as-synthesized γ-AƖ2O3 was optimized for efficient fluoride removal from water. A central composite design (CCD) was used to study the effect of initial fluoride concentration, pH, contact time, and sorbent dose on fluoride removal efficiency and optimization of the process. The relative importance of the sorption process variables to the fluoride removal process was assessed using ANOVA. The quadratic model showed that the predicted response was significantly correlated with the experimental response (R2 = 0.9667), with sorbent dose and pH being the process's most influential factors. Optimum conditions for 93.6% fluoride removal efficiency were sorbent dose of 0.5 g, initial fluoride concentration of 10 mg/L, pH 7, and contact time of 137.5 min. A weakly acidic medium favored fluoride removal from water, while the presence of PO43- and HCO3- retarded the process. The sorption data fitted well in the Langmuir isotherm (0.9783) and pseudo-second-order kinetic model (0.9999), indicative of a chemisorption process. The maximum sorption capacity towards fluoride was 207.5 mg/g. A thermodynamic study indicated that the sorption process was spontaneous and endothermic, with increased randomness at the solid-solution interface. Sorption, desorption, sustainability, and leaching tests showed that the sorbent could be used for sustainable fluoride removal at 8.3 USD/1000 liters of safe drinking water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.