Abstract
Suspensions consisting of precursor α/β SiAlON forming powders, azeotropic solvent mixture of 60 MEK/40E, dispersant, binder, and plasticizer were optimized for tape casting by rheological measurements and tape properties. Sodium tripolyphosphate (STPP) was introduced as a dispersant for low temperature applications of α/β-SiAlONs. Optimum STPP amount was determined as 0.012 g/m 2 (of the particle surface) for stable α/β-SiAlON suspensions. Different amounts of binder/plasticizer mixtures were added to the slurries and the effects on rheological and green tape properties were investigated. Green tapes with dibutyl phthalate (DBP), and plasticizer mixture, poly(ethylene glycol) (PEG) and DBP, exhibited centered cracks with high plasticity, on the other hand, polyvinyl butral (PVB) and PEG showed no crack but low plasticity. Therefore, many different parameters were found to be effective on final tape properties. In addition, tapes were prepared with 6 vol% PVB + PEG, sintered at 1800 °C for 2 h and exhibited almost 97%TD in room temperature applications of α/β SiAlONs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.