Abstract
We investigated the relative merits and limits of pulsed laser deposition from AlN targets in vacuum and low-pressure nitrogen in obtaining stoichiometric and crystalline aluminum nitride thin films. We used two UV excimer laser sources (λ=248 nm): a nanosecond system (τFWHM=30 ns) and, a subpicosecond (τFWHM=450 fs) system. The obtained structures were characterized by x-ray diffraction, electron microscopy in cross section, selected area electron diffraction, and profilometry. We demonstrated that the best results are obtained with the sub-ps laser source in vacuum and in low pressure nitrogen when the AlN thin films are very pure, crystalline, clearly exhibiting a tendency to epitaxy. Metallic Al is present in the films deposited with the ns laser source. We believe this is an effect of the gradual decomposition of AlN inside the crater on the target surface under multipulse laser irradiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.