Abstract
To bring modernisation in low carbon economy, the latent heat storage (LHS) systems are crucial for sustainable future of smart energy generation and management systems for renewable sources. This article provides in–depth numerical analyses of 3-dimensional computational models incorporating coupled thermal enhancement techniques for identifying optimal solution to guarantee higher charging rate, higher total enthalpy and better thermal distribution of LHS system. Paraffin is selected as phase change material (PCM), graphene nano-platelets (GNP) as nano-additives and longitudinal, circular and wire-wound fins as extended surfaces in vertical shell-and-tube configurations. Based on numerical analyses, the extended surfaces have registered better thermal distributions and charging rates as compared to nano-PCMs. The geometrical orientation of extended surfaces and volume concentration of nano-additives have significant influence on melt front movement, natural convection and heat transfer performance. The peak values of heat fluxes are significantly increased from 2.25 kW/m2 for paraffin without thermal enhancement to 35.86, 47.23 and 88.13 kW/m2 for nano-PCM with 1% GNP in circular, longitudinal and wire-wound fins configurations. Hence, the charging duration for capturing 11.09 MJ is significantly reduced to mere 1.02 h for wire-wound fins configuration as compared to 23.5 h for paraffin without thermal enhancement. Likewise, the charging rate of wire-wound fins configuration is 20.95%, 35.96% and 89.94% higher than circular fins, longitudinal fins and nano-PCMs without extended surfaces, respectively. The increase in volume concentration from 1% to 5% has exhibited adverse implications on accumulative enthalpy, natural convection and charging rate. Therefore, the novel design of coupled enhancement with wire-wound fins configuration and nano-PCM with 1% GNP are established as optimum solution for potential wide-ranging practical utilisations of LHS system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
