Abstract
The effect of cupric (Cu2+) ion as an additive in the acidic electroless nickel plating (ENP) bath on the characteristics of the resulting nickel−phosphorus (Ni−P) alloys was investigated mainly with X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray (EDX) spectrometry. Cupric ions in the acidic ENP bath using hypophosphite anions as reductants have been reported ambiguously as stabilizers or codeposit constituents. In this work, the critical concentration of added copper salts, CuSO4·5H2O, that starts to inhibit the ENP process was determined to be ca. 536 mg/L. In general, the deposition rate, surface morphology, and pit formation on the surface of as-deposits are significantly improved with Cu2+ addition at concentrations less than the critical value. The electroless nickel alloys were shown as a mixture of an amorphous deposit and a crystalline copper metal rather than as amorphous alloys alone.1,2 During the initial stage of the electroless plating process, the copper conten...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.