Role of copper- or cerium-promoters on NiMo/γ-Al2O3 catalysts in hydrodeoxygenation of guaiacol and bio-oil

Abstract

Effect of copper (Cu) or cerium (Ce) as promoters for nickel-molybdenum/γ-alumina (NiMo/γ-Al2O3) catalyst on the hydrodeoxygenation (HDO) of guaiacol (GUA), a model oxygenated compound found in a bio-oil derived from woody biomass, was comparatively investigated. The addition of Cu- or Ce-promoters affected the physicochemical properties of the NiMo catalyst. The NiMo catalyst promoted by Cu showed the higher reducibility, whilst the Ce-promoter (2–8 wt% based on γ-Al2O3 content) provided the NiMo catalyst with a higher distribution of active metals and induced a greater difficulty in the reduction under hydrogen (H2) atmosphere. For the HDO of GUA at a mild reaction condition (10 bar initial H2 pressure and 300 °C) in the absence of solvent, the Cu-promoter enhanced the hydrogenation activity of the NiMo catalyst to convert GUA to phenol and methylphenols, one-atomic oxygen species. Whereas, the addition of Ce obviously inhibited the formation of coke on the catalyst surface after a long reaction period (6 h) and gave a higher GUA conversion level with increasing yield of phenols. For the HDO of real bio-oil obtained from the fast pyrolysis of cassava rhizome, the NiMo catalysts promoted by Cu or Ce at 4 wt% based on the γ-Al2O3 content showed a higher performance at eliminating the oxygenated compounds in the bio-oil, reducing the oxygen/carbon (O/C) molar ratio by over seven-fold from 1.75 to 0.24–0.25. Moreover, the gross heating value of the bio-oil was improved from 21.5 to ca. 29.0 MJ/kg after the HDO process. However, the addition of the Cu or Ce promoter did not inhibit coke deposition, possibly due to the acidic properties of the bio-oil that deteriorated the catalyst performance by metal leaching.