Abstract

A large amount of ammonium salt leaching agent will remain in the leaching site of weathered crust elution-deposited rare earth ore (WREOs). The release of residual ammonium (RA) will seriously affect the water system ecology of the mining area, and it is urgent to control it. In this paper, column eluting was used to simulate the eluting process of RA in rare earth (RE) ore tailings, and the effects of calcium chloride concentration, eluting temperature, liquid-solid ratio, eluent pH and eluent flow rate on the eluting process of RA in rare earth ore tailings were discussed. It was found that calcium chloride could effectively elute the RA from ore tailings. Eluting agent pH almost had no effect on the eluting process of RA in the pH range of 4–6, and a greater impact on it at pH 8. The flow rate could effectively enhance the elution efficiency. The optimum conditions were calcium ion concentration of 0.1 mol/L, liquid-solid ratio of 2:1, pH 4–6, flow rate of 0.6 mL/min and elution at room temperature. At this time, the elution efficiency of RA was 91.85%. The eluting process of RA in ore tailings was controlled by the inner particle diffusing according to the kinetic analysis. The reaction order was 0.368, and the activation energy of the reaction is 12.450 kJ/mol. This will provide a theoretical basis and technical support for the efficient eluting process of residual ammonium in the leaching site of WREOs.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call