Abstract
The rod-pinch diode is operated successfully at peak voltages of 2.4–4.4 MV for peak electrical currents of 55–135 kA delivered to the diode. At 4 MV, tungsten anode rods of 1 or 2 mm diam produce on-axis doses at 1 m of 16 rad(Si) or 20 rad(Si), respectively. The on-axis source diameter based on the full width at half-maximum (FWHM) of the line-spread function (LSF) is 0.9±0.1 mm for a 1 mm diam rod and 1.4±0.1 mm for a 2 mm diam rod, independent of voltage. The LANL source diameter, determined from the modulation transfer function of the LSF, is nearly twice the FWHM. The measured rod-pinch current is reproduced with a diode model that includes ions and accounts for anode and cathode plasma expansion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
