Rock surface flow accelerates rill erosion of excavated slopes in karst mining areas

Abstract

Rock surface flow is the secondary distribution of precipitation and inflow on the rock surface, an essential runoff generation mode in karst areas. The effects of rock surface flow on soil erosion in karst regions cannot be ignored. However, its impact on rill erosion in karst slopes remains unclear. The objectives of this study were to investigate the impact of rock surface flow on rill erosion, rill morphological characteristics, rill flow hydraulic characteristics, and hydrodynamic mechanisms. A field runoff plot (3 m long, 1 m wide and 0.3 m deep) with three inflow rates (2, 3, and 4 L/min) was subjected to runoff simulation experiments under two typical rock surface morphologies in karst areas: smooth rock surface (SRS) and karren rock surface (KRS), with bare slope (BS) as the control group. The results revealed that rock surface flow aggravated the soil and water loss of the excavated slope. Compared to BS, the runoff yield for SRS and KRS increased by 81.49 % and 61.91 %, respectively. Meanwhile, the soil loss of SRS and KRS were 2.50 times and 5.56 times greater. The rills below the rock outcrops didn’t develop into a rill network after formation, owing to the rock surface morphology. Rill depth was the best indicator of rill morphology for evaluating rill erosion on slopes below rock outcrops. The Reynolds number and Darcy–Weisbach resistance coefficient were the optimal hydraulic parameters to predict the rill erosion of the SRS and KRS, respectively. At the same time, the runoff power and flow shear stress were the best hydrodynamic parameters to describe the rill erosion mechanism of SRS and KRS. These results provide a scientific basis for further understanding the mechanism of soil erosion on karst slopes and for preventing soil erosion on karst slopes in mining areas.