Rock-physics model of a gas hydrate reservoir with mixed occurrence states

Abstract

Seismic interpretation of gas hydrates requires the assistance of rock physics. Changes in gas hydrate saturation can alter the elastic properties of formations, and this relationship can be considerably influenced by the occurrence state of gas hydrates. Pore-filling, load-bearing, and cementing types are three single gas hydrate occurrence states commonly considered in rock-physics investigations. However, many gas hydrate-bearing formations are observed to have mixed occurrence states, and their rock-physics properties do not fully conform to models of single occurrence states. We develop a generalized rock-physics model for gas hydrate-bearing formations with three mixed occurrence states observed in the field or laboratory experiments: coexisting pore-filling-type and matrix-forming-type gas hydrates (case 1); pore-filling type when [Formula: see text] (gas hydrate saturation) < [Formula: see text] (critical saturation) and pore-filling + matrix-forming type when [Formula: see text] (case 2); and matrix-forming type when [Formula: see text] and matrix-forming + pore-filling type when [Formula: see text] (case 3). Instead of initial porosity, the apparent porosity (the volume fraction of an effective pore filler) [Formula: see text] represents the influence of occurrence states on the pore space. These three mixed occurrence states can be modeled using a unified workflow, in which the volume fractions of various gas hydrate types are expressed in general forms in terms of the apparent porosity. In addition, the model considers the effect of a pore filler on shear modulus. The developed model is validated through calibration with real well-log data and published experimental data corresponding to five gas hydrate-bearing formations. The model effectively interprets the influences of gas hydrate saturation and occurrence state on these formations. Thus, the generalized model provides a theoretical basis for the analysis of sensitive elastic parameters and quantitative interpretation for gas hydrate reservoirs.