Rock core VOC profiles diagnostic of aquitard occurrence and integrity in a multi-layered sedimentary rock aquifer flow system

Abstract

Aquitard assessment poses a challenge for practitioners and researchers managing dense non-aqueous phase liquid (DNAPL) contaminants in sedimentary rock aquifer systems. Within these systems, DNAPL migration and bulk hydraulic properties are controlled by fracture networks which are difficult to characterize at relevant scales with conventional methods. A previous study at a DNAPL contaminated site used contrasts in high-resolution vertical gradients to delineate four aquitards and two surfaces with poor vertical connectivity within a thick (>200 m) sedimentary rock aquifer system primarily composed of layered sandstones. In this study, we corroborate that method by using the existing DNAPL contamination as a tracer to identify and characterize the aquitards in the sequence and assess aquitard integrity. Closely spaced samples of rock from four continuous cores were collected and analyzed for volatile organic compounds (VOCs). The cores were collected along a transect perpendicular to groundwater flow and 75 m downgradient of the DNAPL source zone. Dissolved phase contaminant concentrations were collected using high-resolution multilevel systems placed along the plume centerline, downgradient from the source. The rock core and groundwater VOC concentration profiles suggest a primary aquitard limits vertical migration of both DNAPL and the associated dissolved phase contaminants, despite relatively large, downward gradients across its lower boundary. A calibrated, three-dimensional numerical groundwater flow model indicates an anisotropy factor of 1,000 for this aquitard. The Kv values for all four aquitards are only slightly lower than the values for the aquifers. However, the aquitard Kv values are 1–3 orders of magnitude less than their Kh values, and the aquitard Kh values are often similar to or even greater than the Kh values for the aquifers. Therefore, large anisotropy, rather than exceptionally low Kv values, distinguish the aquitards from the aquifers in this system. Fracture network characterization of nearby outcrops showed the anisotropy of the aquitards can be attributed to laterally extensive, bedding parallel partings coupled with short, frequently terminating, and poorly connected vertical fractures. In addition, the rock VOC profiles combined with fracture network data show that fracture termination surfaces can be powerful inhibitors of downward DNAPL migration providing additional evidence for the importance of these features in sedimentary rock flow systems. Ultimately, this study reveals the important influence of anisotropic aquitards on DNAPL migration, accumulation, and persistence, as well as associated plume migration. Furthermore, it demonstrates that subtle contrasts critical to aquitard integrity may be easily missed with long screened wells and other conventional, low resolution site characterization methods.