Robust, thermally insulating, and high-temperature resistant phosphate-enhanced mullite fiber porous ceramic composites

Abstract

Porous mullite ceramics with high porosity and low thermal conductivity are urgently required as high-temperature thermal insulators in harsh environments. How to improve the strength of Porous mullite ceramics dramatically under the premise of no sacrificing its thermal insulating properties has remained an extremely challenging. Inspired by the freezing rain phenomenon in nature, high-strength and high-temperature resistant phosphate coatings were applied to the surface of mullite fibers, which significantly improved the mechanical properties of porous mullite ceramics without significantly increasing their thermal conductivity. The Al(H2PO4)3 solution concentration significantly affected the mechanical and thermal properties of the composite material, where the mechanical performance improved with an increasing Al(H2PO4)3 solution concentration. The phosphate coating phase stabilized with an increasing calcination temperature. The mechanical properties of the ceramics were improved by the excellent interfacial bonding strength between the coating and mullite fiber, and the forms of phosphate in the porous ceramics. The optimum composite preparation process increased its compressive strength by approximately nine-fold to 4.1 MPa and resulted in a thermal conductivity of only approximately 0.09 W/(m·K), demonstrating that the composite exhibited a significantly higher comprehensive performance than other previously reported porous ceramics and aerogels. Such new composites with excellent mechanical and thermal insulation properties exhibit excellent potential for high-strength thermal insulation in the chemical, metallurgical, pharmaceutical, aerospace, and other fields.