Abstract

Integrated motor-transmission (IMT) powertrain systems are widely used in future electric vehicles due to the advantages of their simple structure configuration and high controllability. In electric vehicles, precise speed tracking control is critical to ensure good gear shifting quality of an IMT powertrain system. However, the speed tracking control design becomes challenging due to the inevitable time delay of signal transmission introduced by the in-vehicle network and unknown road slope variation. Moreover, the system parameter uncertainties and signal measurement noise also increase the difficulty for the control algorithm. To address these issues, in this paper a robust speed tracking control strategy for electric vehicles with an IMT powertrain system is proposed. A disturbance observer and low-pass filter are developed to decrease the side effect from the unknown road slope variation and measurement noise and reduce the estimation error of the external load torque. Then, the network-induced delay speed tracking model is developed and is upgraded considering the damping coefficient uncertainties of the IMT powertrain system, which can be described through the norm-bounded uncertainty reduction method. To handle the network-induced delay and parameter uncertainties, a novel and less-conservative Lyapunov function is proposed to design the robust speed tracking controller by the linear matrix inequality (LMI) algorithm. Meanwhile, the estimation error and measurement noise are considered as the external disturbances in the controller design to promote robustness. Finally, the results demonstrate that the proposed controller has the advantages of strong robustness, excellent speed tracking performance, and ride comfort over the current existing controllers.

Highlights

  • State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Structural Dynamics and Acoustic Systems Laboratory, University of Massachusetts Lowell, One University

  • Using a sliding-mode control (SMC) strategy based on fuzzy logic, Hu et al [11] proposed a longitudinal controller for the autonomous ground vehicle with unknown nonlinearities and parametric uncertainties

  • To realize the precise speed control under complex working conditions, this paper simultaneously considers four typical disturbances to design a novel robust speed tracking control method for the Integrated motor-transmission (IMT) powertrain system is proposed in this work

Read more

Summary

Introduction

State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Structural Dynamics and Acoustic Systems Laboratory, University of Massachusetts Lowell, One University. The speed tracking control design becomes challenging due to the inevitable time delay of signal transmission introduced by the in-vehicle network and unknown road slope variation. The system parameter uncertainties and signal measurement noise increase the difficulty for the control algorithm To address these issues, in this paper a robust speed tracking control strategy for electric vehicles with an IMT powertrain system is proposed. Due to the fast dynamic behavior and weak damping characteristics, the IMT powertrain system tends to have torsional oscillations [4,5] It can deteriorate the vehicle maneuverability and ride comfort under complex disturbances, which commonly include road slope variation, signal transmission time delay in a vehicle control system, and measurement noise. These published works ignore the interference from in-vehicle control systems, such as networked-induced delay (which may deteriorate the control quality)

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call